vmware安装银河麒麟V10高级服务器操作系统

vmware安装银河麒麟V10高级服务器操作系统

• 1、下载银河麒麟V10镜像
• 2、VMware安装银河麒麟V10高级服务器操作系统
• • 2.1、新建虚拟机
  • 2.2、安装虚拟机
  • 3、配置银河麒麟V10高级服务器操作系统
  • • 3.1、安装vmware tools
    • 3.2、配置静态IP地址 和 dns
    • 3.3、查看磁盘分区
    • 3.4、查看系统版本、内核版本

      1、下载银河麒麟V10镜像

      官方提供使用通道 访问官网 链接: https://www.kylinos.cn/

      下拉到页面最底部 点击产品试用申请 输入申请信息 根据用户类型选择 个人用户试用选个人就行

      输入手机号 获取验证码 输入验证码后 会跳转到镜像下载界面

      

      跳转到镜像下载界面 如下 选择银河麒麟高级服务器操作系统V10 选择对应的CPU架构

      

      点击下载链接

      

      推荐使用BitTorrent下载，迅雷就可以

      

      下载完成后

      校验文件完整性 对比sha256哈希值 应该是一样的 不一样的说明文件有损坏 需要重新下载

      certutil -hashfile Kylin-Server-V10-SP3-General-Release-2303-X86_64.iso SHA256
      

      

      2、VMware安装银河麒麟V10高级服务器操作系统

      2.1、新建虚拟机

      

      

      镜像文件选择下载的镜像文件

      Kylin-Server-V10-SP3-General-Release-2303-X86_64.iso 点击下一步

      

      选择 其他 Linux 4.x 内核 64位

      

      然后 下一步

      

      填写虚拟机的名称 然后下一步

      

      填写磁盘大小 然后下一步

      

      点自定义硬件

      

      配置 内存 处理器 等

      

      然后点 完成

      

      2.2、安装虚拟机

      开启虚拟机

      

      选择Install Kylin Linux Aduanced Server V10 然后回车

      

      等待进入安装界面

      

      

      进入安装界面了

      选择中文

      

      选择安装目的地

      

      存储配置 选择自定义 然后点击左上角 完成 按钮

      

      新挂载点将使用以下分区方案(N): 选择LVM

      

      磁盘100G，进行以下分区策略

      挂载点	分区名称	分区大小	分区文件系统	设备类型
      /	根分区	50G	ext4	LVM
      /home	home分区	20G	ext4	LVM
      SWAP	SWAP分区	15G	SWAP	LVM
      /var	var分区	14G	ext4	LVM
      /boot	boot分区	1G	ext4	Stand Partition
      biosboot	biosboot分区	2M	BIOS Boot	Stand Partition

      点击+ 创建根分区

      

      选择文件系统是 EXT4

      

      然后点击 左下角 + 创建 第二个分区 /home

      

      

      

      然后点击 左下角 + 创建 第三个分区 SWAP

      

      

      然后点击 左下角 + 创建 第四个分区 /var

      

      

      然后点击 左下角 + 创建 第五个分区 /boot

      

      

      然后点击 左下角 + 创建 第六个分区 biosboot

      

      添加biosboot时可能遇到剩余空间不足2M的情况 导致无法添加biosboot分区

      

      解决方法是 先缩小/var分区 预留出来1G

      添加完成biosboot后，再把剩余所有空间分配给/var

      

      下拉页面 点击更新设置 即可更新/var分区的大小

      

      注意页面左下角会显示 当前剩余 可用空间

      

      至此 分区创建完成

      点击左上角 的 完成

      

      

      下一步是 设置root账户密码

      

      软件选择

      

      

      

      

      选择组件完成后 然后点击左上角的完成

      

      主机名配置

      

      点击应用后 显示当前主机名是kylin

      

      然后点击左上角 完成

      

      最后点击 开始安装

      

      

      最开始就是创建 我们自定义的分区

      

      接下来 等待安装完成 不会太久

      

      显示安装完成 既是已经安装成功 点击 重启系统

      

      等待系统重启

      

      

      

      点击 我同意许可协议 (A) 和 左上角 完成

      

      点击 结束配置

      

      然后进入 登录界面

      

      输入 同户名 root 输入密码 进入系统

      

      麒麟系统的桌面 泰裤辣

      

      3、配置银河麒麟V10高级服务器操作系统

      3.1、安装vmware tools

      麒麟系统的桌面 泰裤辣

      

      文件管理器 进入VMware Tools 目录

      右键 选择 再在终端中打开

      

      cp VMwareTools-10.3.25-20206839.tar.gz /root/
      cd /root/
      chmod 777 VMwareTools-10.3.25-20206839.tar.gz
      tar -zxvf VMwareTools-10.3.25-20206839.tar.gz
      cd vmware-tools-distrib/
      

      执行安装命令

      ./vmware-install.pl
      

      一路回车即可

      安装过程输出如下

      [root@kylin vmware-tools-distrib]# ./vmware-install.pl 
      Creating a new VMware Tools installer database using the tar4 format.
      Installing VMware Tools.
      In which directory do you want to install the binary files? 
      [/usr/bin] 
      INPUT: [/usr/bin]  default
      What is the directory that contains the init directories (rc0.d/ to rc6.d/)? 
      [/etc/rc.d] 
      INPUT: [/etc/rc.d]  default
      What is the directory that contains the init scripts? 
      [/etc/rc.d/init.d] 
      INPUT: [/etc/rc.d/init.d]  default
      In which directory do you want to install the daemon files? 
      [/usr/sbin] 
      INPUT: [/usr/sbin]  default
      In which directory do you want to install the library files? 
      [/usr/lib/vmware-tools] 
      INPUT: [/usr/lib/vmware-tools]  default
      The path "/usr/lib/vmware-tools" does not exist currently. This program is 
      going to create it, including needed parent directories. Is this what you want?
      [yes] 
      INPUT: [yes]  default
      In which directory do you want to install the documentation files? 
      [/usr/share/doc/vmware-tools] 
      INPUT: [/usr/share/doc/vmware-tools]  default
      The path "/usr/share/doc/vmware-tools" does not exist currently. This program 
      is going to create it, including needed parent directories. Is this what you 
      want? [yes] 
      INPUT: [yes]  default
      The installation of VMware Tools 10.3.25 build-20206839 for Linux completed 
      successfully. You can decide to remove this software from your system at any 
      time by invoking the following command: "/usr/bin/vmware-uninstall-tools.pl".
      Before running VMware Tools for the first time, you need to configure it by 
      invoking the following command: "/usr/bin/vmware-config-tools.pl". Do you want 
      this program to invoke the command for you now? [yes] 
      INPUT: [yes]  default
      Initializing...
      Making sure services for VMware Tools are stopped.
      正在停止vmware-tools（透过 systemctl）：  [  确定  ]
      The module vmci has already been installed on this system by another installer 
      or package and will not be modified by this installer.
      The module vsock has already been installed on this system by another installer
      or package and will not be modified by this installer.
      The module vmxnet3 has already been installed on this system by another 
      installer or package and will not be modified by this installer.
      The module pvscsi has already been installed on this system by another 
      installer or package and will not be modified by this installer.
      The module vmmemctl has already been installed on this system by another 
      installer or package and will not be modified by this installer.
      The VMware Host-Guest Filesystem allows for shared folders between the host OS 
      and the guest OS in a Fusion or Workstation virtual environment.  Do you wish 
      to enable this feature? [yes] 
      INPUT: [yes]  default
      The vmxnet driver is no longer supported on kernels 3.3 and greater. Please 
      upgrade to a newer virtual NIC. (e.g., vmxnet3 or e1000e)
      The vmblock enables dragging or copying files between host and guest in a 
      Fusion or Workstation virtual environment.  Do you wish to enable this feature?
      [yes] 
      INPUT: [yes]  default
      Skipping configuring automatic kernel modules as no drivers were installed by 
      this installer.
      Disabling timer-based audio scheduling in pulseaudio.
      Do you want to enable Guest Authentication (vgauth)? [yes] 
      INPUT: [yes]  default
      Detected X server version 1.20.8
      Distribution provided drivers for Xorg X server are used.
      Skipping X configuration because X drivers are not included.
      Skipping rebuilding initrd boot image for kernel as no drivers to be included 
      in boot image were installed by this installer.
      The configuration of VMware Tools 10.3.25 build-20206839 for Linux for this 
      running kernel completed successfully.
      You must restart your X session before any mouse or graphics changes take 
      effect.
      To enable advanced X features (e.g., guest resolution fit, drag and drop, and 
      file and text copy/paste), you will need to do one (or more) of the following:
      1. Manually start /usr/bin/vmware-user
      2. Log out and log back into your desktop session
      3. Restart your X session.
      Found VMware Tools CDROM mounted at /run/media/root/VMware Tools. Ejecting 
      device /dev/sr0 ...
      Enjoy,
      --the VMware team
      [root@kylin vmware-tools-distrib]# 
      

      3.2、配置静态IP地址 和 dns

      cp /etc/sysconfig/network-scripts/ifcfg-ens33  /etc/sysconfig/network-scripts/ifcfg-ens33.bak
      

      编辑网卡配置文件

      vi /etc/sysconfig/network-scripts/ifcfg-ens33
      

      ①BOOTPROTO=dhcp 改为 BOOTPROTO=static

      ONBOOT=no 改为 ONBOOT=yes

      ②插入以下内容

      IPADDR=192.168.2.152  #静态IP地址
      NETMASK=255.255.255.0 #掩码
      GATEWAY=192.168.2.2   #网关
      DNS1=192.168.2.2      #首选DNS
      DNS2=114.114.114.114  #备选DNS
      

      网卡配置文件参考下述改动过程

      更改前

      TYPE=Ethernet
      PROXY_METHOD=none
      BROWSER_ONLY=no
      BOOTPROTO=dhcp
      DEFROUTE=yes
      IPV4_FAILURE_FATAL=no
      IPV6INIT=yes
      IPV6_AUTOCONF=yes
      IPV6_DEFROUTE=yes
      IPV6_FAILURE_FATAL=no
      IPV6_ADDR_GEN_MODE=stable-privacy
      NAME=ens33
      UUID=25fa4dcd-5fca-47c0-a335-c3acb7b4abed
      DEVICE=ens33
      ONBOOT=no
      

      更改后

      TYPE=Ethernet
      PROXY_METHOD=none
      BROWSER_ONLY=no
      BOOTPROTO=static
      DEFROUTE=yes
      IPV4_FAILURE_FATAL=no
      IPV6INIT=yes
      IPV6_AUTOCONF=yes
      IPV6_DEFROUTE=yes
      IPV6_FAILURE_FATAL=no
      IPV6_ADDR_GEN_MODE=stable-privacy
      NAME=ens33
      UUID=25fa4dcd-5fca-47c0-a335-c3acb7b4abed
      DEVICE=ens33
      ONBOOT=yes
      IPADDR=192.168.2.152
      NETMASK=255.255.255.0
      GATEWAY=192.168.2.2
      DNS1=192.168.2.2
      DNS2=114.114.114.114
      

      更改完成后重启网络服务使得更改生效

       systemctl restart NetworkManager.service 
      

      3.3、查看磁盘分区

       df -lTh
      

      

      3.4、查看系统版本、内核版本

      cat /etc/*release
      cat /etc/.productinfo
      cat /etc/.kyinfo
      

      版本是SP3 代码是Lance

      term=2025-07-27 表示系统试用过期时间是2025-07-27，系统过期对使用无影响。会有激活到期提示,不能再享受售后服务。

      

      内核版本是4.19.90-52.22.v2207.ky10.x86_64，gcc版本是7.3.0，glibc版本是2.28。